Vehicle & Technical > Suzuki

SJ413 rear Diff

(1/4) > >>

baz2236:
Tonight mine decided to go wrong where the prop shaft connects has gone loose and the oil has came out.

my first question is :-
Is this a common fault

the Second question is :-
Are the front diffs the same as the rear diff. if not has anyone got a 413 Rear axle. fairly local to me.

Whatmot:
sorry i cant help you baz, hope you can get it fixed by tomorrow

generation-x:
baz no a front diff wont fit the rear axle im afraid
has the main pinion bolt just come lose or hase the bearing calapsed?

simon

baz2236:
Hi i belive my ratio is 3.909 a standard SJ413 the alternative is to get a pair of Vitara diff i suppose,

has anyone got 2 front diffs for a Vitara. Also anyone relativly local to me know how to the swap?

buckshot:
hey baz,if its just the output bearing gone drop your rear prop remove nut and prop flange (you may need a puller to get it off the splines) fetch the seal out then tease the bearing out with 2 screwdrivers(its only a taper bearing) then you need a timken 30306m bearing available from enginering or bearing supliers and a 72x40x10 seal good luck.

Navigation

[0] Message Index

[#] Next page