Vehicle & Technical > Discovery

Tyre rubbing on standard disco

<< < (3/3)

beatmasterdave:
ive had these muds on for 10 months just started playing around this month :?  :cry:  :cry:  :cry:  :cry:

Budgie:
Well something has change in the steering if they weren't rubbing when you first put them on.

Get the tracking checked and also make sure there's no play in the panhard rod bushes, try to tighten the securing nuts as well, these could cause the axle to move from side to side.
Also, jack each of the front wheels off the ground and grab the tyre at the 12 & 6 o'clock positions and shake. If you feel any movement then get the swivle pin preload checked. If there is play here then someone looking at the seal around the chrome swivle will see it moving.
Then grab the tyre at the 3 & 9 o'clock position and shake. If you feel any movement here then check the wheel bearings.
Then look for cracking or movement in the chassis bushes for the radius arms.
 
If you've already checked the front drag-link & track rod then then one of the above should lead to the problem.

Navigation

[0] Message Index

[*] Previous page