Vehicle & Technical > Military

Voltage stabiliser

(1/2) > >>

TechnoTurkey:
Copy of my post from the Series forum:

Oh the joys of owning a military Land Rover, earmenow kindly picked up a voltage stabilier for me yesterday and we went to his garage to do some bits to his 88" and I also tried to find the original voltage stabiliser on mine - to no avail.

It is not behind the instrument panel, anyone any ideas as to its exact location?

EvilEd:
Found this

"After having problems with under-reading fuel and temp guages a while ago, I
removed the steering wheel, loosened the instrument panel, disconnected the
speedo drive, accessed the voltage stabiliser and adjusted it to give a more
accurate reading on the guages.
"

Original is here http://www.fourfold.ca/RoverWeb/lro/Year-1997/970708.html

TechnoTurkey:
Thanks, but the problem is on my military landy it isnt in the normal place!

muddyweb:
Are you sure you have one fitted ?

If the vehicle was converted from 24V, the person doing the conversion may have omitted to fit one.

Just a thought.

TechnoTurkey:
Vehicle was 12v from manufacture, is an arctic spec jobby not a ffr or anything fancy like that.

Navigation

[0] Message Index

[#] Next page

Go to full version