AuthorTopic: squeeeky brakes  (Read 721 times)

0 Members and 1 Guest are viewing this topic.

Offline Alex.Y

  • Posts: 34
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
squeeeky brakes
« on: May 17, 2007, 01:19:45 »
I know land rovers do have them, my brakes are squeeking like mad when i depress the pedal, whats the best cure?

Offline jaws

  • Posts: 565
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
squeeeky brakes
« Reply #1 on: May 17, 2007, 09:37:35 »
1- pads worn to metal
2- stone inbetween pads and disc or caliper and disc or backing plate and disc
3- tiny vibrations the sound like squeels are caused by the pad vibrating in the caliper.
if only i was as intelligent as i look!
why do ex's never get the hint...STOP STALKING ME,THIS MEANS YOU!
engaged an never happier!

Offline Tinks

  • Posts: 119
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
squeeeky brakes
« Reply #2 on: May 17, 2007, 10:45:16 »
There not new are they??
If not then they may be rusty and lipped, try cleaning and regreasing them! :wink:
THE BRIGHTER THE BETTER!

Offline Boddle

  • Posts: 486
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Boddle on Xbox
    • Coventry UK
  • Referrals: 1
squeeeky brakes
« Reply #3 on: May 17, 2007, 12:09:18 »
On two pot calliper brake disc you need a metal (0.5mm alloy) plate that goes between piston and pad (takes out vibration apparently). Usually rear only on Land-Rovers(discs all round)

Offline Terranosaurus

  • Posts: 532
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
squeeeky brakes
« Reply #4 on: May 17, 2007, 12:22:15 »
Try swapping the pads side to side on the vehicle. Squealing is often caused by uneven wear of the pads. By swapping the pads roundyou reverse the wear problem. This is what those small anti squeal shims do, they wedge up only half of the pad to make that bit touch first. A bit like setting up push bike brakes so the trailing edge touches first pulling the rest of the pad on, where if the leading edge touches first it drags itself along the rim or disk forcing the rest of the pad off, the repeated grabbing/dragging and release it what is squealing.

Off course some combinations of pad compound and rotor are just noisy, but usually thats a kind of grinding/rumble not a squeal.
Nissan 4WD CLUB
Humber and Yorks 4x4 Response
PJ Parts - Motor Trade Workshop Consumables
2000Y 2.7TDi Terrano II
Raising money for Macmillan Cancer Support on the Mac 4x4 Challenge - www.justgiving.com/mac4x4nissan

Offline Alex.Y

  • Posts: 34
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
squeeeky brakes
« Reply #5 on: May 17, 2007, 12:38:34 »
thanks so far,
they are only a couple of months old at the very most, i will have a look at the weekend.

Offline mmgemini

  • Posts: 276
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
squeeeky brakes
« Reply #6 on: May 17, 2007, 14:18:36 »
Put new pads in of a different make. Brake people have tried for more years than I remember to try to stop brake linings/pads squeeling.
Some tank tape on the back of the pad can help.
mike
nil illegitimate carborundum.

I can cause trouble in am empty house !!!

Offline 07DefenderSeb

  • Posts: 170
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
squeeeky brakes
« Reply #7 on: May 17, 2007, 14:57:30 »
It could be mice. There could be mice stuck behind the wheels, and when you depress the brake pedal, they might be getting pinched in between the pads and screaming out in pain.

Just a thought.

I'm an amateur mechanic.
If at first you don't succeed...  cheat.

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal