Vehicle & Technical > Suzuki

WANTED: Vitara throttle position sensor

(1/3) > >>

StuartL:
I believe my TPS is faulty as it's returning 0.01 ohms to infinite resistance (measured on a 200-20M scale digital ohm meter) in about 0.5 degrees of movement.

Does anyone have a TPS kicking around?  It's from an injection Vitara and seems to be part of the same loom as the injector itself so I may need both.

TIA,
Stuart

Evilgoat:
Will keep my eyes open. I seem to recall seeing it on the front seet of the vitara I was grubbing in for a sun visor on sun. If I go back I'll grab it for ya.

I still havent got my list of bits yet. Really need to see a CFi manifold :(

StuartL:
If the CFi manifold you want to see is the same as the SPi/TBi manifold I have (which I think we previously determined it was) then you're very welcome to either have photos as required or, perhaps more usefully, just come round with whatever you need to look at and photograph mine.

StuartL:
Hmm, I've just reread the Haynes.  It's a bit unclear whether the TPS should give a proportional reading or a "digital" one...

Evilgoat:

--- Quote from: "StuartL" ---Hmm, I've just reread the Haynes.  It's a bit unclear whether the TPS should give a proportional reading or a "digital" one...
--- End quote ---


Let me drag the bentley manual out and look.  digital would seem a bit posh for the vit :) As for the maifold, its a cas of working out if carb/injection are the same.

I actually found a pic of a cfi I rebuilt so I should be ok, problen is that its nice and clean in the pic without years of baked on crud :)

Navigation

[0] Message Index

[#] Next page