Topic: 90 exhaust (Read 2120 times)

tonycougar · « **on:** April 17, 2007, 23:02:30 »

The centre box on my 200tdi 90 was blowing so I bought a straight through pipe for it.
What a difference, I swear it is much more responsive. I could feel the turbo coming in much earlier. Seemed to have more go. I was keeping up with most of the traffic and they used to leave me behind. I was having to watch my speed , and thats something I'm not used to doing in my 90. All this on a fairly windy day like today was. I used to be able to feel the wind holding me back but not today.

martha focker · « **Reply #1 on:** April 17, 2007, 23:17:04 »

feels good doesn't :D it

leo · « **Reply #2 on:** April 17, 2007, 23:48:41 »

where did you get the new pipe ? :P

tonycougar · « **Reply #3 on:** April 18, 2007, 21:56:10 »

Quote from: "martha focker"

feels good doesn't :D it

It does but I've since been warned I may burn out my valves.
Anyone know how to avoid this?

tonycougar · « **Reply #4 on:** April 18, 2007, 21:56:38 »

Quote from: "leo"

where did you get the new pipe ? :P

Paddocks.

Xtremeteam · « **Reply #5 on:** April 18, 2007, 22:05:05 »

Quote from: "tonycougar"

Quote from: "martha focker"
feels good doesn't :D it

It does but I've since been warned I may burn out my valves.
Anyone know how to avoid this?

:lol: :lol: :lol:
who told you that?

if that were the case there would be thousands of scoobys/evos/skylines with burnt out valves,
fitting a free flow exhaust to a Turbo car especially if it reduces the back pressure & increases flow is a standard way to get more power out a turbo car

tonycougar · « **Reply #6 on:** April 18, 2007, 22:21:56 »

It was a bloke on my other club forum. 4x4uk
So I guess I don't need to worry then. Just enjoy.

Xtremeteam · « **Reply #7 on:** April 18, 2007, 22:28:11 »

basic engine is if you can get it out faster you can get more in faster,
with a petrol there is the posibility of it to run lean & burn valves but as a diesel is an excess air device it cant really run lean,
a lean running diesel is the most economical one,

makes sense to me in my head

tonycougar · « **Reply #8 on:** April 18, 2007, 22:36:59 »

Ahhh. I wonder if he has not read my post on there properly, becuase I have 2 90s (which he knows) and the other is a 2.5 petrol. Maybe he thinks I mean that its that one I've put the pipe onto.

Xtremeteam · « **Reply #9 on:** April 18, 2007, 22:40:01 »

Quote from: "tonycougar"

Ahhh. I wonder if he has not read my post on there properly, becuase I have 2 90s (which he knows) and the other is a 2.5 petrol. Maybe he thinks I mean that its that one I've put the pipe onto.

to a degree a petrol with a free flowing exhaust will benefit but on a Na engine the manifold & system need to be tuned to give the best performance available....

i need to change intrests :lol:

tonycougar · « **Reply #10 on:** April 18, 2007, 22:43:08 »

Nah you would soon get bored of any other interest Mike

grunty · « **Reply #11 on:** April 18, 2007, 22:53:39 »

:D wheres me hacksaw :twisted:
Alan

tonycougar · « **Reply #12 on:** April 20, 2007, 23:42:53 »

I have read elsewhere about this burnt valve thingy now. Seems to be a possibilty, especially when doing heavy towing or other heavy work. Well my 90 does all that so I am concerned I may knack sumat. One of the reasons for putting the pipe on was to gain a bit more for towing and for a bit more oomph off road.
Maybe I'm just being a wet blanket here but I want to get the facts, might consider putting an EGT gauge in so I can monitor it.

Magnum335 · « **Reply #13 on:** April 21, 2007, 09:31:57 »

Egt gauge...

How easy and cheap can we do those mike?

grunty · « **Reply #14 on:** April 21, 2007, 10:28:25 »

What is an EGT gauge?
Alan

tonycougar · « **Reply #15 on:** April 21, 2007, 23:08:50 »

Exhaust Gas Temperature.
Uses a thermocouple probe stuck into gas flow and linked to a gauge in the cab.

grunty · « **Reply #16 on:** April 21, 2007, 23:26:26 »

ahh..

reduced backpressure, faster exhaust escape = higher temp?

Al

Xtremeteam · « **Reply #17 on:** April 21, 2007, 23:35:57 »

ive got quite a fancy EGT guage on mine,

Ill answer tommorow as im knackered & just back in the door

Porny.....
Let me have first go on this one

tonycougar · « **Reply #18 on:** April 21, 2007, 23:43:22 »

Quote from: "Xtremeteam"

ive got quite a fancy EGT guage on mine,

Ill answer tommorow as im knackered & just back in the door

Porny.....
Let me have first go on this one

I can't wait till tomorrow now.

leo · « **Reply #19 on:** April 22, 2007, 00:20:43 »

yep me to would like to learn of this egt guage

Range Rover Blues · « **Reply #20 on:** April 22, 2007, 02:23:54 »

I'd like to know how lowering the restriction (pressure) causes higher temperatures :?

Anyway, I've been looking at the TDI and I want to know which box I get rid of, is it the cat in the front pipe (it's a RRC) just behind the flexi or is it the box in the centre pipe?

I heard something about these pipes from Paddocks, are they stainless?

How much loader are we talking here? (at the moment the TDI is the quiet one :o ).

tonycougar · « **Reply #21 on:** April 22, 2007, 10:40:16 »

The one I got is for a 90 200tdi. It gets rid of the front 2 boxes and leaves you with the rear one. Its hardly any louder. You can just about tell there is a different tone now.

Cassillis · « **Reply #22 on:** April 22, 2007, 12:21:39 »

Got a link for the part please?

Xtremeteam · « **Reply #23 on:** April 22, 2007, 14:30:44 »

i know its not what u want just yet but how many are interested in an EGt guage?

Have this one in my truck which doubles as a boost guage & is also a data logger

I may also be able to do another type but i need to know how many are interested to see if a group buy is worthwhile,
So all together class

hands up who would like one?

Range Rover Blues · « **Reply #24 on:** April 22, 2007, 15:25:56 »

I'd be interested in one, but I need to know roughly how much. Is it a permentant fit or a diagnostic tool?

Xtremeteam · « **Reply #25 on:** April 22, 2007, 16:19:22 »

Quote from: "Range Rover Blues"

I'd be interested in one, but I need to know roughly how much. Is it a permentant fit or a diagnostic tool?

ive got mine as a perminent fit as you need to drill & tap the exhaust manifold

tonycougar · « **Reply #26 on:** April 22, 2007, 16:39:31 »

Don't think I really need one yet but thanks anyway.

Range Rover Blues · « **Reply #27 on:** April 23, 2007, 00:45:55 »

Quote from: "Xtremeteam"

Quote from: "Range Rover Blues"
I'd be interested in one, but I need to know roughly how much. Is it a permentant fit or a diagnostic tool?

ive got mine as a perminent fit as you need to drill & tap the exhaust manifold

Ok, how much?

News:

AuthorTopic: 90 exhaust (Read 2120 times)