Vehicle & Technical > Discovery

cruise control

(1/2) > >>

ade666:
hi all. anyone know if you can retro fit  cruise to a 95 300tdi auto es epec. what do i need to look for if i can

thanks

Range Rover Blues:
I'm not sure you can on the 300TDi but I'm watching with interest, I've not yet seen one with it and I wanted to fit it to ours.

I know the TD5 has it programmed in, all you need is the switch but not sure about the 300 :?

Budgie:
I fitted an aftermarket kit from Conrad Anderson to my 300 TDi and it works fine, if a little slow to engauge.  :wink:

Range Rover Blues:
OOhhh, ta!

waveydavey:
I fitted two to 200 Tdi disco's. That was dead easy really; just a lot of wire running.
THe speed sensor came form the alternator terminal for the rev counter; the brake tags into the existing switch, a magnetig switch to the clutch in teh same circuit and an operating cable to the fuel pump.

I don't know the 300 Tdi but I am damn sure that somebody makes one that will suit. At worst it could pull down on the accelerator pedal.

Navigation

[0] Message Index

[#] Next page