Vehicle & Technical > Defender
Swing away spare carrier
paul_humphreys:
--- Quote from: "wailofthesnail" ---Jimbo,
What make is the swing-away with the hi-lift mount on it? or did you modify it yourself?
--- End quote ---
Its the same make as mine.
Paul
paul_humphreys:
--- Quote from: "Jimbo" ---Paul,
You will probably have to drill out one of the rivets that holds the corner capping on
Jim
--- End quote ---
No it misses them all.
Paul
Jimbo:
--- Quote from: "paul_humphreys" ---
--- Quote from: "Jimbo" ---Paul,
You will probably have to drill out one of the rivets that holds the corner capping on
Jim
--- End quote ---
No it misses them all.
Paul
--- End quote ---
Really ? - the instructions I've got clearly show (and say) that you have to drill the rivet right out. I'll have a look at your pics now - guess I should have done that before posting :oops:
paul_humphreys:
Well Jim, the instruction could be right and I have mine in the wrong place? But its on and works ok. But looking at the pictures on the one web site it looks about right. I started off by just removing the 2 boltes from the cross member, putting the first mount there. Then worked round. Top mount next, door mount last.
Paul
Jimbo:
--- Quote from: "paul_humphreys" ---Well Jim, the instruction could be right and I have mine in the wrong place? But its on and works ok. But looking at the pictures on the one web site it looks about right. I started off by just removing the 2 boltes from the cross member, putting the first mount there. Then worked round. Top mount next, door mount last.
Paul
--- End quote ---
Weird !, I'll have another look when I get the 110 back from 'the shop' (aka, mates garage !). One big prob I have is that I've already chopped the rear end to take NAS lamps, and the indicator and fog get in the way of the carrier mounts........might take the porta-power to the carrier and re-design it slightly :twisted:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version