Vehicle & Technical > Range Rover

Viscous fan

(1/2) > >>

Pete5844 as was:
Hi can anyone help the viscous unit on my 1987 3.5 efi has done one and sounds like it could explode anytine,have been looking for one but the only type I can find screw on to the shaft this one slides on to the shaft and is held on with a bolt.Is my engine older,younger or what.Cheers Pete

edy:
have found this one if its any good cant tell wether it is screw on or not, try to contact him

http://cgi.ebay.co.uk/Classic-1987-Range-Rover-3-5-Viscous-Fan_W0QQitemZ320079918508QQihZ011QQcategoryZ27379QQrdZ1QQssPageNameZWD1VQQcmdZViewItem

zulublue:
Hi Pete,

I have three engines one with a bolt on and 2 with the thread from behind, the engine with the nut is about a 76, while the other engine with the thread from the rear is an SD1, but not sure on the year, I also have a 1990 with a rear thread

If I had to guess I would say the engine was older if it has a nut on the front, might be worth looking at your spark plugs as the older engines had a shorter plug I think, with about 15mm of thread and about 20mm on the newer models.

Someone will be along to put you right.

zulublue:
Pete I may have one, i need to go and check

Pete5844 as was:
Cheers People I've found one on ebay,says if comes from a rover sd1.Cheers Pete

Navigation

[0] Message Index

[#] Next page