Vehicle & Technical > Discovery

DIFF LOCK!

(1/2) > >>

beatmasterdave:
hi all! my diff lock should work, but it dosnt. the stick wont even move side to side at all. would of been really handy at slab common on sunday :x  :x .anyone had this problem before or can help? cheers

J B:
its probably siezed, lots of wd40 around the linkages, and gently ease it off, and i mean gently, you can crack the selecta plate and have a huge oil leak, like what i did  :oops:  :roll:

MuddyMachine:
If you over at the weekend we can have a look.

You going to Challangers open day?

JimsMowing:
I have the same issue myself, its solid when trying to move it accross, but at the same time allows me to swap between high and low ratio.

I have tried the wd40 trick for some 2 hours and with the use of a bar trying to move over the linkage but to no avail. When i get the time i will be removing the plate thats rivet around the diff lock lever and accessing it from above. Failing that then normal 4WD will have to do  :cry:

muddysteve:
Is that why you were stuck lots???

Navigation

[0] Message Index

[#] Next page