Vehicle & Technical > Discovery

Discovery 1 Obsolete Exhaust

(1/2) > >>

CM:
I have a 93/94 2.5di Automatic.  The intermediate section of the exhaust (from the cast section at the manifold end to the box section) incorporates a flexipipe section.  It needs the whole section replacing but
Land Rover have very kindly made it obsolete and all exhaust places I have tried cannot find it listed.

Any suggestions?

Horness:
Not sure if it's the same section, but I'm using a 110 downpipe cut to fit.  This gets rid of the need for the flexi pipe which rots away in 5 minutes.

My local Land Rover garage (not dealer) supplied and fitted it.  Worked out much cheaper than the flexi option too.

Hope that helps.

redhand:

--- Quote from: "CM" ---I have a 93/94 2.5di Automatic.  The intermediate section of the exhaust (from the cast section at the manifold end to the box section) incorporates a flexipipe section.  It needs the whole section replacing but
Land Rover have very kindly made it obsolete and all exhaust places I have tried cannot find it listed.

Any suggestions?
--- End quote ---


Is this the one? http://www.land-rover-parts-shop.com/shop/en/browse/Discovery+1/2/1993/7/17/28/32

Disco Inferno:
just checked my bosal catalogue

they do the pipe for all models except the automatic

looks like it could be a take it off and repair it job

dazzawhipple:
Is it a clamp or flange mating peice on the cast turbo pipe???

Darren

Navigation

[0] Message Index

[#] Next page