Vehicle & Technical > Jeep

Knocking noise

<< < (2/3) > >>

mgilbert:
Have you got a transfer skid plate fitted? If so (and like mine), the transfer case could be just slapping against the plate. A couple of extra washers between the cross-member and plate should do it. This will create some gap between the plate and transfer case.

If you don't have a skid plate, it'll be the transfer case mount.

- Mark

tim_aka_tim:

--- Quote from: "mgilbert" ---If you don't have a skid plate, it'll be the transfer case mount.

- Mark
--- End quote ---


Being a 93, if it doesn't have a transfer skid then some git's nicked it!!!

AngerManagement:
Had 4x4 specialists check it out............unfortunately noise had stopped as i'd not driven it 4 a while and as stated b4 the blasted thing does'nt do it unless i drive it for a long time.  He said he could'nt see any fault with the transfer box bushes/mounts at all, and perhaps i should bring it back when noise has returned (very annouying) :?
As 4a skidplate on transfer box...........can't say i saw 1 there, so i'll have 2 check that 1 out?, but as i said b4, it only does it on heavy break'n after driving it 4 a couple of day, though it does'nt sound like that type of knocking noise (if you know what i mean), it knocks in rotation, i've changed front disc's & pads so its not them!

isle of man:
are you sure the noise is not the rear axle? the plates could be fubar...............







peter henry

skip:
Not wishing to sound silly, but it's not the ABS cutting in is it? only say it as the system is crap and even a wet manhole cover sets mine off.

Navigation

[0] Message Index

[#] Next page

[*] Previous page