Vehicle & Technical > Defender

Fitting power stearing pump on 90Td

(1/1)

Artwigwa:
Hi, I need to fit a new power stearing pump to my 90Td as it's seized :( , Does anyone have any handy tips on how to fit one?
Thanks

minty:
hi mate ive just finnised sorting mine out after it sized up along with my belt tensioner !  on a td5 90 the best thing i can suggest is remove/losen the fan belt and just try to turn the pully
it could be just a bearing you need  :D  if this is the case you need a 15mm socket to remove the bolt in the centre of the pully remember its a LEFT HANDED THREAD  :shock:
 take it to eny place localy that does bearings thay will normaly remove and refit for you (you can also yous a hi-lift jack to repress the bearing in) should cost no more than a £10.00 as a pose to £25.00+vat for a new one and takes about 30 mins off/on

hope this helps got eny questions just shout me  :lol:  :wink:
p,s,p at the rear in photo.
][/img]

Artwigwa:
Hi, Thanks for the info :D  Gonna give it a go this weekend. ta

Navigation

[0] Message Index