Vehicle & Technical > Discovery

Springs & Things

<< < (2/2)

toger:
Had de-carbon gas shocks all round and BM HD blue disco springs fitted on the rear today, too early to tell if there is any difference.
It looks a litttle higher but that may be my imagination, time and a good day off road will tell, I think :D

Range Rover Blues:
As a rule of thumb I recon that the front Panhard Rod should be horizontal at standard height, that is it should line up exactly with the 'spare' LHD mounting point on the RHS of the axle.
I've heard good things from owners on both DeCarbon and Monroe but I havn't the pockets to try them out yet.  One criticism is that the Monroe rears tend to tear open around the top mounting bush as they aren't fully welded (so I'm told).

hobbit:

--- Quote from: "Range Rover Blues" ---As a rule of thumb I recon that the front Panhard Rod should be horizontal at standard height,
--- End quote ---


don't mention them things, 3 months and the bushes are worn out, can't see how, I never do anything in it   :wink:

Ref the Munroe's I'll keep an eye on them, thanks

Navigation

[0] Message Index

[*] Previous page