Vehicle & Technical > Range Rover

Alternator

(1/1)

MrTFWitt:
I inherited a Rangerover V8 last year and finally have some time to look at it.

First thing to fix is the alternator.
The old one had a snapped off terminal stud so I replaced it with a newer one only to find I still have a battery warning light on the dashboard despite having 14 volts hitting the battery.

The newer alternator has 4 connections on it though.
Ive connected
B+ to the battery, fat wire off to the battery
W  Brown and yellow wire to a terminal post
?  Single white wire to a spade connector

One free smaller terminal post has nothing to connect to and I have no rev counter.


I hope all this means something to somebody, the only haynes manual I have at present is for an SD1 V8 which I suspect has completely different wiring.

MrTFWitt:
The new unit is a Delco Remy DRA3588

A bit of googling shows the W connection as a tacho output


Anyone have a wiring diagram for an 89 V8 to hand ?

Need to know which of the skinny wires does what

Range Rover Blues:
OIne connector should be left unless you have a split charge system IIRC, assuming it's still a compatible alternator.

You need only 2 wires to get the thing charging, the charge wire (battery) and the excitation wire or warning lamp wire.  Start by getting these 2 right.

The 3rd wire is for the alternator and the olast one can have a supressor on it IIRC

J.D.:

--- Quote from: "MrTFWitt" ---The new unit is a Delco Remy DRA3588

A bit of googling shows the W connection as a tacho output


Anyone have a wiring diagram for an 89 V8 to hand ?

Need to know which of the skinny wires does what
--- End quote ---


If you PM me with an email address I should be able to find one which I can scan in and email for you. Might take a couple of days to dig it out the workshop though.

Navigation

[0] Message Index