Vehicle & Technical > Suzuki

Jimny lift

(1/2) > >>

brewster:
Hi all,

I'm thinking of getting myself a Jimny, but only want to do so if I can lift it!  Would some one like to tell me how to go about this?  ie, how easy is the mod, and where is the best place to get the bits (price etc).

Thanks...

Paul

AbyssDJ:
lay underneath it, put both hands on the underneath and push reasonably hard :D

spoofer2888:
jimnys are easy to lift just put longers springs on you can get 2" lift springs for them and vitara's springs are the same just heaver duty

Grinch:
Dead easy.  Kits from Procomp are good.  i have a rhino Ray 3.5 inch lift on mine.

longer brake hoses are a must tho.

Matt

jimny gary:
For a 2" lift you will need:-

Procomp 2" lift kit with springs and shocks £226 (www.explorerprocomp.co.uk)
Goodrich extended brake hoses £39 (www.explorerprocomp.co.uk)
Castor corrected bushes £77 ( rubbers suzuki and other places) Or alternatively look at the thread on here where people have re-welded the radius arm mounts to compensate for the castor angle.

Gary

Navigation

[0] Message Index

[#] Next page