AuthorTopic: Jimny lift  (Read 1016 times)

0 Members and 1 Guest are viewing this topic.

Offline brewster

  • Posts: 3
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Jimny lift
« on: January 31, 2007, 20:05:56 »
Hi all,

I'm thinking of getting myself a Jimny, but only want to do so if I can lift it!  Would some one like to tell me how to go about this?  ie, how easy is the mod, and where is the best place to get the bits (price etc).

Thanks...

Paul
Read the directions, even if you don't follow them.

-Mary Schmich

AbyssDJ

  • Guest
Jimny lift
« Reply #1 on: January 31, 2007, 20:07:05 »
lay underneath it, put both hands on the underneath and push reasonably hard :D

Offline spoofer2888

  • Posts: 39
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Jimny lift
« Reply #2 on: January 31, 2007, 20:19:05 »
jimnys are easy to lift just put longers springs on you can get 2" lift springs for them and vitara's springs are the same just heaver duty
aka  steve

Offline Grinch

  • Posts: 57
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Jimny lift
« Reply #3 on: February 01, 2007, 13:41:33 »
Dead easy.  Kits from Procomp are good.  i have a rhino Ray 3.5 inch lift on mine.

longer brake hoses are a must tho.

Matt
My universe is 24 hours long and 10 feet wide.  If it happens outside of those parameters, I probably dont know about it.

Offline jimny gary

  • Posts: 180
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Jimny lift
« Reply #4 on: February 01, 2007, 13:49:35 »
For a 2" lift you will need:-

Procomp 2" lift kit with springs and shocks £226 (www.explorerprocomp.co.uk)
Goodrich extended brake hoses £39 (www.explorerprocomp.co.uk)
Castor corrected bushes £77 ( rubbers suzuki and other places) Or alternatively look at the thread on here where people have re-welded the radius arm mounts to compensate for the castor angle.

Gary
www.4x4Recovery.com  - Sensibly priced recovery gear

Jimny, 6:1 lobster box, rear discs etc

Offline zukro

  • Posts: 2
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Jimny lift
« Reply #5 on: February 05, 2007, 16:42:07 »
you don't buy a jeep , u build it!

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal