Vehicle & Technical > Series Land Rovers

Home made snorkels?

(1/2) > >>

Fuddy as muck:
After taking the Series wading just below bonnet height a few times lately i'v decided to make my own snorkel. is it just a case of diverting the airbox inlet up the front screen pillar or is there something else needed aswell?

Darren

blackbob:
house drain pipe makes a good snorcal as its the right diameter

trustyrusty:
62 mm black plastic drain pipe plus you can get 45 degree bends and clips to mount it. you best of coming out the drivers side wing as you have the heater the other side.

Robbo:
anyone got any pics of any???
presumably you need to chain oil bath for something else? if so what?
Cheers
Robbo

Tractorboy16:
hi
mate, this is what i did,

yer, you need to change the oil bath to a 90 one with is a filter type, I may have one coming up for sale of my one but not deffinate yet as may need for my izusu engine.

Then i just put it up the window screen in piece of downpipe which had then been plastic coated.

Pics below.







hope this helps

you may want to think about putting axle and gearbox and transfer box breathers on as well as then you don't affect the pressures in these components, axles are easy to do.


James

Navigation

[0] Message Index

[#] Next page