Vehicle & Technical > Discovery

Pipe

<< < (2/2)

Pete:
Two small brackets attached to the snorkel, screwed to the screen pillar
with self tappers.
 Mark the position of the holes, drill, then inject underseal or similar before installing the snorkel.  This protects against any chance of water
getting into the pillar, and prevents the screws from rusting in.

 A similar bracket holds the snorkel to the inner wing.

Skibum346:

--- Quote from: "onzasam" ---So i may be able to get drainpipe to fit inside the wing then! How would i fix it to the side of the window? Theres all the door rubbers there isnt there, so cant really screw into it  :?
--- End quote ---


Mine is fitted with a B&Q square plate riveted to the A pillar on the rear most face.

In this pic your looking forward on the car with the drivers door closed. In the distance the bonnet is up.

Got more pics but I think I've posted them to you already.. if not... check out my profile pics.

Skibum

90sam:
But how would the snorkel attach to the brakcet? And do i need a rivet gun or something, are they expensive, or could i screw the bracket it? haha
Thanks very much for all the pictures there really useful :)

Pete:
Couple of pics with the wing removed, shows what goes where.

Navigation

[0] Message Index

[*] Previous page