Vehicle & Technical > Defender

sun visor mounts

(1/2) > >>

burgerman:
Howdy all, Wifey has a Td5 csw, and the passengers side sun visor has pulled its screws out of the headlining, the cause was a seized visor, but now i cant get a screw to hold its self in there ??   im guessing it has a catch/ plastic thingy behind it ?? But also looks like the headlining/screen has to come out to replace, And im defnitaly not going down that route for a sun visor, well not  untill the screen is replaced,    Any ideas ??

Snooky:
Very big self tapper......

ChrisW:
What about a spring toggle type fixing you get for putting shelves up on plasterboard sort of thing?

Jimbo:
My 110's not here at the moment, else I'd have a look - but from memory it's a machine screw that holds the sunvisor, and the screw goes through the headlining into a captive nut in the top of the windscreen surround - its a bit of a bu&&er to line up the screw when the lining is in place.

jamesledingham:

--- Quote from: "Jimbo" ---but from memory it's a machine screw that holds the sunvisor, and the screw goes through the headlining into a captive nut in the top of the windscreen surround - its a bit of a bu&&er to line up the screw when the lining is in place.
--- End quote ---


He's right...

They're dead eay when there's no headlining!!

Navigation

[0] Message Index

[#] Next page