Vehicle & Technical > Suzuki

HELP surspension !---> Hay guys

<< < (2/5) > >>

Oz:
3" Suspension Lift. Designed by K.A.P. Superb quality. £145 + VAT per pair. they the only one i can find on K.A.P.     http://www.kapsuzuki4x4.co.uk/samurai.asp Are these the once you were talking about?

How do u fit them?
do u take the leafs off?

rollazuki:
set of jeep springs, spring over axle conversion, new shocks.

Check out rocky road outfitters in the USA.

Other than that, get onto rubbers suzuki and wave cash at them, they make nice gear.

wheelspinner:
Depends how handy with the spanner you are?
 
IMHO steer clear of the shackle lifts for all the reasons explained before.

Id go remove the front anti roll bar,then a 3 lift (SMJ or KAP),new shocks Pro comp or Vauxhall Astra shock you need and adapted inboard shock mounting bar.
Could also try the D link set up.

Dont forget to budget for extended brake lines and i would replace the suspension bushes with poly's while i was at it.

Regards

Steve

Oz:
Hay cheers for the help..  ddo u guys no how spoa work eg do leafs get taken off? have any you guy got spoa could u post some pics? rocky road outfitters

V8MoneyPit:

--- Quote from: "Oz" ---3" Suspension Lift. Designed by K.A.P. Superb quality. £145 + VAT per pair. they the only one i can find on K.A.P.     http://www.kapsuzuki4x4.co.uk/samurai.asp Are these the once you were talking about?
--- End quote ---


Yes.



--- Quote from: "Oz" ---How do u fit them?
do u take the leafs off?
--- End quote ---


Yes! They are replacement leaf springs. If you choose to go to KAP, talk to Darren and he will advise what you need.

Longer brake hoses - Yes, forgot about those. You will need these. Again any of the suppliers will be able to provide these with your springs/dampers.

With the KAP springs, I cut off the rear shackle movement limit brackets. The standard shackles bang against them with the 3" lift springs. They have never gone over centre, so appear not to be needed.

Some suppliers will offer propshaft spacers. I haven't fitted them and haven't had any problems.

I am using the Pro Comp ES3000 shocks. Not cheap, but nice quality.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version