Vehicle & Technical > Series Land Rovers

dashboard stoped working

<< < (3/3)

ross501:
will the regulator stop them working is there a way to test it

MisterC:
I agree with hobbit, almost certainly the voltage regulator/stabilizer.  This is fixed to the back of the speedo and supplies the power for both the fuel and temp gauges.  You'd need a multimeter to test, but you should see a steady c. 10 volts on the output wire (light green) when the ignition is on.  Feed wire (green) is fed from the same fuse that feeds the brake lights, so if they are working you know the fuse is ok, although it is worth double checking all fuses (there's only 4), as over time people add/move accessories around and the fuse connections then don't match the wiring diagram.  They're pretty cheap to replace, or you could consider a solid state version, some of whcih are advertised on eBay as voltage stabilizers.  Hope this helps.

ross501:
have ordered a voltage regulator today hopefully it will all be okay after

Navigation

[0] Message Index

[*] Previous page