Vehicle & Technical > Discovery

keep losing brake pads

<< < (4/4)

windowlicker:
excellent reply :D
as i have replaced the piston i will see how it goes but if they start to look ropey i will change the caliper :wink:

cheers
kev

rommelsraider973:
Just replaced all front and rear pads on my Disco. All new springs and pins  , had to get extra(recently mentioned..why dont they come in with the pads??) cleaned out with brake cleaner spray and wire brushed all areas before re-fitting. Lots of copper grease on all surfaces , now good as new....just taking a bit of time and care ....does help!

As to the belts , maybe your tensioner is off centre a little bit? Does it give of a bit of a squeak as well? If so give me a call as i hace a suprising mod that will hopefully sort it all out for you!! Dont worry , it took me a new set of tensioner bearings and 3 belts before mine was sorted!! :lol:

My number is available through my e-mail at buzz973@hotmail.co.uk


Hope we can get you sorted??

windowlicker:
hi mate cheers for the offer but i should of mentioned its a 200tdi with no tensioner but a couple of washers spacing the alt out has touch wood at the minute temporarily sorted it :D

Navigation

[0] Message Index

[*] Previous page