Vehicle & Technical > Suzuki

Samurai axles in a 410?

(1/2) > >>

Dan2020:
I own a SJ410, will Samurai axles with diffs fit straight in or do I need Samurai hubs, props etc???  Would it be the same for ordinary 413 axles also??

Thanks for any help!!

generation-x:
hi dan
if im reading your post right
yor lookin to fit sammy axles to ur sj410? if so no they wont just fit onto ur sj as the spring on a sammy are on the outside of the chassis where as on the 410/413 they sit inline with the chassis

the conversion can be done but you have to get ur measurements right or the axles wont sit straight and ur be crabbing down the road

hope this is wot you mean if not just say

simon

Dan2020:
Yeah, that is what I meant! Sounds like too much work!!! :(

Would 413 axles fit straight in then and would they be a worthy upgrade??

generation-x:
hi dan
yes sj413 axles will slot straight onto ur sj 410 the only difference will be the final diff ratios in the 1300 axles

simon

Dan2020:
So are the diff ratios the only difference between 410 and 413 axles?

Does this mean I could use a 410 diff with a 413 axle and use 410 driveshafts with a 413 axle and vice versa?

Sorry for the questions but want to get it done right! :D

Navigation

[0] Message Index

[#] Next page