Vehicle & Technical > Discovery

No Diff Lock ?

(1/2) > >>

Horness:
I needed to use Diff Lock over the weekend, which worked fine a couple of weeks ago - however now, the gear knob will not go over at all.  Low box works fine.

Any idea's?  It was stiff when I bought the Disco 5 years ago, but as I use it for shooting etc. at least twice a week, the low/diff lock knob was free and easy to use.

Horness

chris9119:
Horness

Sounds like you have a stone trapped. Even if it had become disconnected, it would still move. The only other thing it could be, is it's seized.

Chris

Horness:
Great news.   :roll:   It was working fine, and for the last 2-3 years not been hard to engage at all.  Now, not even with 2 hands will it move.  :cry:

Cheers Chris.

chris.hunt22:
I agree with Chris, I went on a quarry fun day in my last disco and couldn't disengage diff lock, upon inspection the lever on the back of the box had half a quarry ramming it in the on position, a crow bar soon sorted it out though, if it isn't that then I don't know!! :lol:

Horness:
The place I've been shooting on lately is quite stony on the approach, which could explain it.  It's really slippery once through the woodland, and I don't fancy getting stuck and going back for the tractor.

Thanks guys.  I'll check it out.  :wink:

Horness

Navigation

[0] Message Index

[#] Next page