Vehicle & Technical > Suzuki

ENGINE SWAP 410 TO 413 OR 8V VITARA

(1/2) > >>

zukiman:
HI
REQUIRE SOME TECHNICAL ADVICE FROM SOMEONE WHOS DONE THIS CONVERSION
IF I FIT A 413 GEARBOX TO MY 410 TRANSFER BOX I COULD THEN FIT 413 ENGINE BY FABRICATING NEW ENGINE PLATES
OR..........
IF I FIT 413 GEARBOX TO MY 410 TRANSFER BOX AND BUY ADAPTOR I CAN FIT 8V VITARA AGAIN FABRICATING MY OWN ENGINE PLATES
DOES THIS ALL ADD UP BEFORE I START
MANY THANKS FOR ANY INFO RECIEVED

generation-x:
zukiman
1st off wot speed is ur current 410 gearbox?
in theory it can be done if your goin to all the trouble of fitting a bigger engine you may as well fit the vitara lump basic dimentions as the 1.3 just longer bore strokes

simon

zukiman:
THANKS FOR INFO
IF I GET HOLD OF A 5 SPEED SJ 413 GEARBOX MATE IT TO MY 410 TRANSFER BOX ENGINE ADAPTOR PLATE THEN I CAN FIT 8V VITARA
AM I CORRECT IN THEORY
THANKS  ZUKIMAN

generation-x:
in theory yes m8 no reason why not
conversion plate from rhinocentral will set ya back about 60 quid
vit engine anything between 100 and 300 for a good 8v carb'd motor
sammy gearbox 40 quid maybe
then just make up the engine mounts using the vitara ones if you can get them with some good thick plate to bolt to ur 410 engine mounts
410 t-case will be good for gearing upto 33" boots your axles are another matter might be worth upgrading them to sammy units if possible  :)

zukiman:
HI
CONFIRMED WHAT I THOUGHT MIGHT BE POSSIBLE
THANKS FOR CONFIRMING THE FACTS
TOP GEEZER

Navigation

[0] Message Index

[#] Next page