Pages: [1]   Go Down

AuthorTopic: Bullbars  (Read 4135 times)

0 Members and 1 Guest are viewing this topic.

Offline Fitz

  • Posts: 29
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Bullbars
« on: October 15, 2004, 10:47:03 »
Will bullbars from a 200Tdi 1993 fit a 300Td1 1994?

I have seen a set for sale but don't want to buy them if the front end is different.

Any help would be appreciated.

Dave
Logged

Offline Wanderer

  • Posts: 4846
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Bullbars
« Reply #1 on: October 15, 2004, 15:30:26 »
I would doubt that a 200 bar would fit on a 300.
I had a 300 bar on my 200 and it sat further away from the grill. I'd say that a 200 bar won't have enough room on a 300. It's down to the bumper changes on the 300.

Ed
Logged
Ed
1993 200tdi Snorkly

Offline Wanderer

  • Posts: 4846
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Bullbars
« Reply #2 on: October 15, 2004, 15:31:30 »
Give Formula 4x4 a ring.
I also had to cut the valance on my 200 to get the 300 bar to fit.

Ed
Logged
Ed
1993 200tdi Snorkly

Offline Stripes

  • Posts: 88
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Bullbars
« Reply #3 on: October 16, 2004, 08:12:15 »
the 200 and 300 tdi aren't interchangeable as i found out to my cost :oops:

the holes for the 200 are above each other but on the 300 they are staggered
hope this helps  :wink:
Logged
the greater the mind!!!!
the more need for simplicity at PLAY
Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal