Vehicle & Technical > Discovery

Discovery Rear Diff

(1/2) > >>

knightrider:
Hi
 i,m asking this question for zuludelta5
will a 200tdi rear diff fit a 300tdi apart from changeing the out put flange from 3 bolts to 4 bolts as he wants to put a 200tdi rear prop on as well...
many thanks
                 
                       Richard.... :D

Range Rover Blues:
No, the 200 is 10 spline, the 300 24 spline.  He'll need the half shafts also and even then it might not seal properly.

Henry Webster:
Just to confuse the issue, I believe that some late 200's were 24-spline, but it is unusual.  Also with a LR there is always the possibility that it has already been changed.

As RRB says there are important differences between fine and coarse spline axles.

H

Tyke:
Input flanges are different as well . . . depends whether it has a rear uj or rubber doughnut.

Range Rover Blues:
But if you fit one from the front it will have the 4 bolt flange.

Navigation

[0] Message Index

[#] Next page