Vehicle & Technical > Range Rover

Will TD6 wheels fit a P38 ?

(1/3) > >>

v8kenny:
Hi Chaps
Have the chance of a set of 18" hurricane alloys and tyres from a 2003 TD6 range rover - would these wheels go straight on my 1996 4.6 HSE ?
I know they are fine size wise but not sure if the hubs or stud centres are the same or if the offset is different, maybe needing spacers - anyone fitted a set ?

hairyasswelder:
not fitted a set but they need spacers for the centre of the hub as far as i have been told, seen them available on e-bay for reference

Steve

v8kenny:
Thanks Steve
I had a feeling they would need something - don't fancy mucking about with spacers and I don't suppose they will be cheap
Maybe just wait on a set of 18" wheels for a P38 turning up - I ain't in any hurry    :wink:

Xtremeteam:

--- Quote from: "v8kenny" ---Thanks Steve
I had a feeling they would need something - don't fancy mucking about with spacers and I don't suppose they will be cheap
Maybe just wait on a set of 18" wheels for a P38 turning up - I ain't in any hurry    :wink:
--- End quote ---


IIRC its a plastic spacer ring that goes over the centre of the hub just to centre the wheel,u also need to get a set of wheel nuts to match the TD6 wheels

v8kenny:
Cheers Mikee

Navigation

[0] Message Index

[#] Next page