Vehicle & Technical > Discovery

Roof light bar

(1/2) > >>

RICHR:
Hi
Please can anyone describe best way of wireing 4 x 55w spots so as i can run them on main or dip beam.
Also a diagram of rear of 30 amp relay of what goes where as i can never remember

Thanks
Rich

TimM:
That's been answered recently, have a look using the search button at the top, you'll find a wiring diagram and details of the relay  :wink:

Pete:
Shouldn't roof lights be switched independently of the vehicles main lighting?

 Since they are for off road use only, usually to give a better angle of lighting to normal head lights or spots, they should be used with either side lights only, or, indeed, no other lights at all.

 Pete.

Tyke:
Yep . . . see other post on roof lights.


Indepent wiring is best in my view. No chance of accidently dazzling other road users when you switch to main beams that way.

Range Rover Blues:
The LAW says you can have up top 6 lamps on as your main beam, there is no restriction on height but they should be mounted symetrically.

Dipped beam you can have 2.

Navigation

[0] Message Index

[#] Next page