Vehicle & Technical > Defender

Has any one tried this and is there any point??

(1/2) > >>

dreadnought110:
Just wondered if anyone has tried this what can you run a 300 tdi turbo at pressure wise mine runs at 15psi is there any point or am i more likely to damage something?? :?  :?   http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&sspagename=STRK%3AMEWA%3AVRI&viewitem=&item=140054438287&rd=1&rd=1

Porny:
I can supply better ones than them.......

No point unless you increase fuel to match.

Although..  boost pressure will drop as you actuator wears... and on a 300Tdi the boost is a pain in the arse to adjust.  
One of these makes life easy!!!


Ian

dreadnought110:
The turbo is only about 6 months old what sort of price can you do one for??? and what can you go up to safley on boost pressure?? :?

Porny:
And stopping wastegate creep on a 300Tdi doesn't make that much difference (and I doubt that kit will do it properly)....

I was running with two boost gauges on my 90 the other day - experimenting!!  :wink: and although there is a slight difference, not worth it IMHO.

Even running 1.4bar doesn't change anything...... need more fuel, but I need a thermocouple in my exhaust before I do that.

I might also be doing a range of uprated injector pumps for 300Tdi's (and 200Tdi's) soon... not just the usual tweaked pump... but one with bigger internals, matched flow rates, matched injectors etc etc.  Need to find out prices though.


Ian

Porny:

--- Quote from: "dreadnought110" ---The turbo is only about 6 months old what sort of price can you do one for??? and what can you go up to safley on boost pressure?? :?
--- End quote ---


Need to check... think they are about £25... but can't rememeber.

Boost pressure wise, you'll get about 1.4bar (20psi) out of a standard turbo, wouldn't really go higher than this... but you need to sort the fueling out to match, or not much point.

Running higher boost and more fuel will reduce your engine life, but properly serviced etc etc you shouldn't have any problems.

I should also have a few other bits and pieces for Tdi's very soon... i.e. when i finally sort them out!


Ian

Navigation

[0] Message Index

[#] Next page