replacement seats

[Lawnmower]

do the cards have ya photo on them?

no, they just use it to swipe you in, then use it again when your at the till.

by the way, forgot to say the price is excluding VAT,

i make that £105.73, still not bad tho.

here is the current advert.

Is that power station in the add any good, my £10 cheap as chips battery charger has given up the ghost (mental note: dont keep shorting it out to see what happens)

[mark.yellow.series.3]

i dont know about the power station,
when you get in MAKRO theres loads of goodies to spend your money on.

[M19 ROO]

my £10 cheap as chips battery charger has given up the ghost (mental note: dont keep shorting it out to see what happens)

LMFAO that really did have me laughin a lot!


as bezzabsa said astra gsi:

[Lawnmower]

my £10 cheap as chips battery charger has given up the ghost (mental note: dont keep shorting it out to see what happens)

LMFAO that really did have me laughin a lot!


as bezzabsa said astra gsi:

Those seats look comfy.

I was trying to work out how to removed rust using electrolysis. Think the charger I had, had an internal cutout switch anyway.

[Lawnmower]

Finally got myself to makro, seats I got were slightly different to those in the picture, cost me "85 + vat, ~ £100. Seem comfy enough. not sure how well they will survice mud, but at that price cant complain.
Included runners, and the recline, and go right forward. Will fit them in a few weeks, when have the time.

[Matt_H]

www.makro.co.uk

thats the place i bought mine from

Unfortunatly its for business users only! (need loads of ID/vat certificates etc)

loads of us have cards, if you are passing reading you can borrow mine :)  They never check the name on the card vs who is paying and I often lend mine to the guys at work.

Matthew

[stefan]

Just fitted a pair of Citroen BX 16 Valve seats to mine, cost me £40, they are very comfy, slightly narrower runners than the existing, so I had to just drill new holes and raise the rear slightly.

The drivers side lumber also adjusts the side bolster so they are very grippy, and best of all, the base lifts out on both so you can still get the battery in and out etc.

Excuse the poor quality pic, taken with a mobile!

Stef

[davidlandy]

do the cards have ya photo on them?

here is the current advert.

mmmm nice wheel covers

wot a bargain!

[Rob110]

Just fitted a pair of Citroen BX 16 Valve seats to mine, cost me £40, they are very comfy, slightly narrower runners than the existing, so I had to just drill new holes and raise the rear slightly.

The drivers side lumber also adjusts the side bolster so they are very grippy, and best of all, the base lifts out on both so you can still get the battery in and out etc.

Excuse the poor quality pic, taken with a mobile!

Stef

Stef is there enough room to still fit a cubby box in the middle?

[stefan]

Certainly is, I put an Exmoor Trim one in yesterday, I'll try to get some better pics tomorrow and post them on here.

Stef

[Range Rover Blues]

I've got som espare Rangie seats if you want, leather or cloth.

[stefan]

Here are the pics with the cubby box fitted, I think there's exactly the same room as with normal seats.

Stef

[stefan]

................and a couple more.

Stef

[Devon-Rover]

I have seen the exmoor trim modulars in a 110 and they are very comfy to sit in, just like my exmoor Extreme's in the series.
The fitted seat heaters too also make it more bearable in the winter so i'm tempted to fit the heater kit to my seats.

[tim-green]

Now got Discovery 2 Front seats in the Defender, Great for my resent trip to Wales. :D

[smo]

Now got Discovery 2 Front seats in the Defender, Great for my resent trip to Wales. :D

They look very smart, how do they fit width wise?

[tim-green]

The actual width is about the same as the original defender seats so I had no problems with keeping the Cubby Box.

[smo]

Thats good then, no problems with the handles/shoulders and the sides of the cab??