Vehicle & Technical > Defender

Urgent Master Cylinder Help Needed

(1/1)

Guy90:
I've changed the clutch master cylinder on my 300TDi 90.

There is no pressure on the pedal now and it goes straight to the floor. I've been trying to bleed it but it wont pump any fluid though.

Any ideas what's wrong. I've done this job several times and never had this issue.

Thanks for any help.

Xtremeteam:
have you bled the master cylinder itself?

Guy90:

--- Quote from: "RedlineMike" ---have you bled the master cylinder itself?
--- End quote ---


Yep. Having taken it to bits again, it does pump fluid though if you manually opearate it by pushing the piston in and out.

The problem seems to be in the adjustment. It wont let me adjust it properly. When you tighen one nut the other one becomes loose.

Xtremeteam:
Yu have a PM

Navigation

[0] Message Index