Vehicle & Technical > Suzuki
Water poison
(1/1)
baz2236:
Just a general question to see how people over come Water posion issues are the rubber gloves oover the leads the best approach or are the better measures out there.
Baz
generation-x:
hi baz
there is a guy on ebay that sells kits for the dizzy
its like sticky rubber
have used it very good indeed
simon
muddyjlx:
plastic bottle.
get one with a wide neck so you can feed all the leads through, then seal it with silicone.
for the coil get a ice cream tub and fit the coil inside that.
Evilgoat:
Well used to be the first big spoalsh would kill The Rabbit.
Now it takes about 5 minutes of continued dunking to even get a misfire. Dizzy has the breather run through the firewall and the base smeared with silicone grase so it seals. Inside the ht boots is the same, grease to ensure a seal and a bit on the wire as it passes through the boot.
Coil wise, I have a rubber boot I got from billing for about £1 and its works a charm.
Only let-down I have at the moment is the plug ends fouling. Need to work a solution for that, someone has suggested hi-temp silicon spray.
rollazuki:
Halfrauds ignition sealer spray worked well for me, but best advise is.............fit a diesel :lol:
Navigation
[0] Message Index
Go to full version