Vehicle & Technical > Defender

NAS light kit

(1/2) > >>

BDH110Landie:
I'am instaling a NAS light kit and the rear lights have gone on not a problem, but the plinths for the lights on the front won't fit because of the ridge on the edge of the headlight surround.
Can anyone help? :?:

Litch:
You have to re-drill the mounting holes to bring the plinth inside the edge of the surround, there are a few people who have carefully trimmed the plinth so it fits over the surround but I was happy to drill the bodywork.

Have you re-drilled the real holes as well? You have to unless you don't mind the stop/tail lights overlapping the edge of the bodywork (that looks a bit naff in my opinion). How many lights have you got on the rear, I find the 8-light set-up is more effective and just looks better than the 6-light set-up?

Jimbo:
Fine-toothed hacksaw, and a steady hand..........tis the only way !

Jim

BDH110Landie:
That's what i was gonna do. I just thought i would ask someone before i started cuting holes in my landie. I have only put the reverse and fog light in at the moment (looks better already) just another 6 to go. Thanks for your help.

Jimbo:
BDH,

Take a look at this post that BTM started - there are some good pics, and links to pics within it.

http://forums.mud-club.com/viewtopic.php?t=21471&highlight=nas+lamps

Jim

Navigation

[0] Message Index

[#] Next page