Vehicle & Technical > Discovery

popping off

<< < (2/3) > >>

Skibum346:
SAad to say there are no instructions with Wizards kit (that I can remember anyway) but it's a very straighforward job.

1. Unscrew existing breather (lots of WD40 just in case)
2. CScrew in replacement valve
3. Push plastic pipe into valve

The rest is finding a sensible route to the snorkel.

Gearbox & transfer boxes are difficult only due to access to breathers.

Good luck

Tyke:

--- Quote ---thought that not having the wading plugs in would give the gearbox plenty of room to vent
--- End quote ---


Nowt to with the g/box are the wading plugs.

Bellhousing and timing case only. G/box, t/box, axles and fuel tank have  independant and separate breathing systems.

stevegreen:
TADTS  a really poor clip on the dipstick unfortunately

SnakeLogic:
Problem solved.



Not terribly pretty, but fairly robust and effective (a bit like me, I suppose.)

stevegreen:
lol I have just used a large rubber band wrapped a few times around the tube then over the cap.  Needs replacing every couple of months as the rubber perishes.

Like the idea of the jubilee clip,,,might borrow that  :D

Navigation

[0] Message Index

[#] Next page

[*] Previous page