AuthorTopic: Tyre Fitting Guide  (Read 89688 times)

0 Members and 1 Guest are viewing this topic.

Offline Pete

  • Posts: 248
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 1
Tyre Fitting Guide
« Reply #30 on: November 08, 2007, 08:54:11 »
There is no 265/70/16  
 
  Really?????  
  I have to wonder what Iv'e been running on for the past couple of years.  265/70 R16  G-TRAX  AT, is what it says on all five tyres on mine. Mates Disco has the same size in MT.
  Lite cut to rear arches, and trim plastic vallance under ftont bumper, no lift needed.
 Pete

Offline Ja1983

  • Posts: 1082
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • This week I have mostly been fixing....
  • Referrals: 0
Tyre Fitting Guide
« Reply #31 on: November 09, 2007, 02:29:51 »
having done a good deal i`m just about to DOWNSIZE to 235/75 R16 in colway MT form, i`m thinking this will assist in gearing, increase claerance(as 235/85`s were a tad close for my liking...

i understand this is standard size on the 300TDI`s?

It has been said that, given enough time, a million monkeys bashing at a million typewriters would eventually produce the complete works of Shakespeare. Thanks to the Saxo forums, we now know this to be wrong

No oil leek = No oil left!

Offline wingy

  • Posts: 6
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Tyre Fitting Guide
« Reply #32 on: November 11, 2007, 18:51:51 »
Hey guys i have a2" lift, i've cut out my arches alot to fit wheel arch spats front and back (Including the rear doors!) and i have extended bump stops. Can someone give me an idea on the biggest tyre i can fit on standard freestyle alloys?

Offline Lumbering Jack

  • Posts: 190
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Tyre Fitting Guide
« Reply #33 on: November 14, 2007, 06:48:13 »
Hi guys,

My 200 disco is running 235/85/16 at's with a 2 inch suspension lift and no apparent arch trimming - I was wondering if my 265/75/16's on 8 spokes will fit off my 130 defender as a temporary thing until I can afford a better set of boots for the disco or will I need to do a bit of trimming? :?: .  

Also, as the discovery is pretty much a play thing, is it worth the hassle of trying to squeeze something like 35/12.5/15s on or should I just stick to a decent 235/85 or similar?  Been looking at either recips, machos or insa turbo special tracks
R reg 3.9 Discovery on LPG - pretty standard at mo.

Offline Dr Strangeglove

  • Posts: 137
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Tyre Fitting Guide
« Reply #34 on: November 26, 2007, 17:46:29 »
Too many sins, not enough temptation!
Too many armpits, not enough deodorant!
Forget maths, forget geometry
You cause explosions by being good at Chemistry
Too many mountains, not enough volcanoes!
Too many lawyers, not enough justice!!!

Offline Ja1983

  • Posts: 1082
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • This week I have mostly been fixing....
  • Referrals: 0
Re: Tyre Fitting Guide
« Reply #35 on: January 05, 2008, 18:46:15 »
Hi guys,

My 200 disco is running 235/85/16 at's with a 2 inch suspension lift and no apparent arch trimming - I was wondering if my 265/75/16's on 8 spokes will fit off my 130 defender as a temporary thing until I can afford a better set of boots for the disco or will I need to do a bit of trimming? :?: . 

Also, as the discovery is pretty much a play thing, is it worth the hassle of trying to squeeze something like 35/12.5/15s on or should I just stick to a decent 235/85 or similar?  Been looking at either recips, machos or insa turbo special tracks

do you want width (thus greater footprint over the area) or bite (narrower tyre with more pressure over the area)??
personal choice

It has been said that, given enough time, a million monkeys bashing at a million typewriters would eventually produce the complete works of Shakespeare. Thanks to the Saxo forums, we now know this to be wrong

No oil leek = No oil left!

Offline bobtailed disco

  • Posts: 452
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Tyre Fitting Guide
« Reply #36 on: March 17, 2008, 21:25:33 »
I have got a 1994 v8 disco with a 2inch lift, anyone no the best tyre size to put on it?? (well what will fit with no chopping). Also anyone know what kind of milage you get out of the bf goodrich ATs and the bf goodrich MTs, I can't decide which ones to go for, Cheers rob
« Last Edit: March 18, 2008, 18:25:47 by bobtailed disco »

Offline mayhem16uk

  • Posts: 39
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Tyre Fitting Guide
« Reply #37 on: July 17, 2008, 17:00:18 »
ive got a set of 286/75/16 BFG muds which were run on a td5 defender driven hard most of the time. towing too. theyve done 60,000 miles and are only half worn at most.
id recommend them to anyone. great in the dry and wet!
1990 3.5 V8 Discovery, 5inch lift, 285/75/16 BFG Muds

Defender 90 Ragtop 2.5NA :(, 285/75/16 BFG Muds, Snorkel, Light Bar, Spots, Roll Cage

Offline Disco Matt

  • Posts: 2666
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • Referrals: 0
Re: Tyre Fitting Guide
« Reply #38 on: August 21, 2008, 18:52:32 »
I've looked in all the sources I can think of and not managed to find this, so can anyone here help? I'm trying to find either the "official" tyre speed rating for a 300 TDI Disco or if there isn't one an official top speed?

Need to know as I fancy a set of Insa Turbo Saharas next time and while I have no intention of doing 106mph (they're Q-rated) I know insurers can be awkward if you don't fit the correct rating.
1996 Discovery 300TDI. She's got it where it counts...

Offline hrh_dave

  • Administrator
  • *****
  • Posts: 790
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +2/-0
    • Lybster, Caithness
  • Referrals: 1
Re: Tyre Fitting Guide
« Reply #39 on: September 10, 2008, 23:52:57 »
Right..... Standard discovery..... 2" lift comming at somepoint in the near future.... whats the max size I can go for?? Bearing in mind Camel Cut is not an option at this time??


Tah moochly in advance as always....

Dave
"Oh but if I went 'round sayin' I was Emperor, just because some moistened bint lobbed a scimitar at me, they'd put me away."
www.terranomade.co.uk

Offline discosfa

  • Posts: 39
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Tyre Fitting Guide
« Reply #40 on: September 13, 2008, 21:56:43 »
 hi folks :)
 have got a 94 300 tdi disco riding on 235/70/16 whats the biggest i can go to without a lift of panel chopping anyone used insa rangers any good as i used to have colway ctrax a t in 31/10.50/15 8 spokes on my 200 tdi with hd standard hieght springs, rubbing on rear arches on heavy offroading.
 anyone have pictures or drawing with measurment on how much to cut out on a camel cut ?
                discosfa :D

    anyone got any idea's
« Last Edit: September 20, 2008, 14:10:03 by discosfa »
"1994 discovery 300 tdi (improvment work in progress)"
de-cat, egr removed, mid box gone straight through pipe and new tail fitted
 cb coming soon

Offline loony landy

  • Posts: 96
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Tyre Fitting Guide
« Reply #41 on: November 02, 2008, 20:12:47 »
Hi folks got a disco 1 that will be running a 2" lift kit, will 265/70/16 fit ok ??

If not what will i need to do to get them to fit ??

cheers

tony

Offline AndyMacG

  • Posts: 71
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Tyre Fitting Guide
« Reply #42 on: November 10, 2008, 14:49:28 »
right ho chaps

got  2" lift on my disco   and some one has kindly left me a set of 7.50r 16 michelins on wolf rims :lol:   tried them on full lock and they dont rub like my 235's do ,but would I have to cut the arches  ????   for when I go off road????
1998  Jeep Cherokee Sport 4.0

Offline Disco Matt

  • Posts: 2666
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • Referrals: 0
Re: Tyre Fitting Guide
« Reply #43 on: January 18, 2009, 11:25:54 »
Does anyone know if this would work? I've checked the figures on that site:

I'm considering a 1in lift and 235/85 R16s with trimmed arches. Looking at the guide the 235/85s are 2.3in larger diameter than the 235/70s, which equates to an extra inch above and below the axle. A 1in lift should provide the extra clearance needed above them?

I'm trying to avoid lifting it too much as I realise this will make it less stable on side slopes and while cornering. Plus it'll reduce wear on propshafts, etc. Not likely to happen for a while but I'm just gathering information with a view to assembling the parts over time.
1996 Discovery 300TDI. She's got it where it counts...

Offline crazymac

  • Posts: 1891
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Tyre Fitting Guide
« Reply #44 on: January 18, 2009, 16:24:33 »
One of my mates in the Discovery Owners Club is running 235/85R16 with no lift! Just new suspension and a camel cut.

I've looked at it with mine which is also on new springs and it looks fine for me as well, so a purchase is imminent.
I HAVE THE BODY OF A GOD

shame its Budda!!

Offline Disco Matt

  • Posts: 2666
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • Referrals: 0
Re: Tyre Fitting Guide
« Reply #45 on: January 18, 2009, 16:34:15 »
Fair enough - I notice a lot of 1in lift springs are also described as "heavy duty" I think I'd still buy new shocks, springs, and brake lines as that'd give me more droop too.

I don't want to end up with a huge-tyred monster that is only really challenged by pay and play sites, as I much prefer a bit of gentle laning. However, on a couple of occasions I've been in a situation where an extra inch or so of clearance under the diffs would do wonders, and an inch of lift won't run into problems with castor angle or propshafts.
1996 Discovery 300TDI. She's got it where it counts...

Offline Vicarious

  • Posts: 11
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Tyre Fitting Guide
« Reply #46 on: February 08, 2009, 22:23:57 »
I have searched and looked all this post so I hope this question from a novice does not make you snigger too much.

I have a 2001 V8 with 18s, I wanted a spare set of rims so I have got hold of set of 16s with 255-65 (actually from a Range Rover Mark II HSE)

I just assumed they would be alright as the tyre places show them interchangeably

Little bro sighed and pointed me to the forum as talking about 'normal' rim sizes was giving him a migraine

Offline KK Mobile

  • Posts: 40
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Project Not Finished Yet!!
  • Referrals: 0
Re: Tyre Fitting Guide
« Reply #47 on: July 09, 2009, 22:41:10 »
Hope this helps someone??

Disco 200 / 300tdi standard height will run something like "General Grabers" 235/85r16 & will just require a trim to the rear of the rear arch lip. We done this on a friends 300tdi & he had no troubles even when towing heavy loads!

I used to have a Disco 1 series with a 2" lift running 235/85r16's & camel cut to rear. When purchased it had colway mt's that were nacked so fitted "Receip Trials" same size with & had no rubbing issues! And no problem's with uj's or standard props!

Then changed tyres to 238/85r16 "Insa Turbo" special tracks!! thinking more agressive but same size so wouldn't have any issue's!! Had rubbing issue's when offroading only! I had to cut quite a bit from front arches as they ripped both front wings & started to peel outer door skin from rear doors! Turn's out when measuring they tyre's the Insa's were 1" bigger.

As for the insurance side of thing's (re speed rating earlier in posts) don't think it will cause you any problem as the tyres are still rated to over 70mph and that is the speed limit! :-k :police:
www.kkmobile.co.uk

I hate tyre kickers!!

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal