Vehicle & Technical > Discovery

sill welding questions...

<< < (5/5)

MZ6666:
Before you start, buy a set of motorbike leathers and a roll of masking tape ,put them on and tape up EVERY orifice :shock:
You'll thank me later.
Also I used 3 angle grinders (1 cutting disc, 1 grinding disc & 1wire brush wheel)-saves time chopping and changing.
I found it very theraputic, especially with a few sherbets at hand
I finished off ,post 'red oxide' with some black stonechip sprayed on with a shultz gun and it looks well.
Good luck
Rich

Navigation

[0] Message Index

[*] Previous page