Vehicle & Technical > Freelander
Suspension lift
V8MoneyPit:
Kit arrived today :D
Looks fairly straight forward. However, there is no mention of cutting bodywork in the extensive instructions. I assume it will be below the track rods to allow clearance at full rebound?
Doobreydog:
Yes....you will probably only have to cut to one side of it then end it over...dont worry about the pastic bit that just pushes out of the way...piccys when yor done.
V8MoneyPit:
Could be a little while before I get to it. Got to clear the 110 out of the workshop first. But I'll try to remember to take before and after photos. Usually get half way though a job and then remember the 'before' photo :roll: :lol:
alankennedy10:
hi all first post on here so HeLLo to you all hope chrimbo was good to you all.
V8MoneyPit
please take extencive phottos of product and before during and after including any areas you need to cut.
reason is i'm most interested in this lift kit myself and would find this of great help to me my thanks in advance.
Doobreydog
you seem to know about tyres will i be ok on BFG AT's OR mud's on a standard vehicle with the size 215/70/16
what are Mud's like on the road are they niosy and what about handling wise
agian much thanks in advance.
Doobreydog:
"Workshop" Fitted mine in middle of a field in Wales....Great fun...
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version