Vehicle & Technical > Discovery

Advice on a body lift

<< < (2/2)

JDB:
.... interested in all this as I am considering the same - does anyone make brackets for moving the bumpers up - not being very handy with a welder - I can do most of the rest though (I think)???
Thanks

clbarclay:
The biggest problem i had when doing the V8 was removing the old bushes, correded in place after 20 years they required some manipulting to get off. Obviously discovery bushes won't be quite so old, but still don't expenct 15 year old bushes to just fall out like new.

Obviously fitting new bushes are no necissery, but given the state of the bushes i decided to take the oppertunity to change the bush rubbers.


If you have an Auto (and its anything like the RRC) then watch out for the pipework on the gearbox oil cooler. It goes under the radiator and then through the body so needs removing before lifting or like me you start wondering why the body doesn't lift up as freely as it should #-o .

Navigation

[0] Message Index

[*] Previous page