Vehicle & Technical > Defender
110 springs
Leigh:
Couldn't find my other post on raising the suspension so thought I would start again.
I would like to raise the front but just enough to level it out. At the moment I have the standard springs on and it is approx 2" higher at the back. I would like to put 2" lifted springs just on the front, would this be ok or would I be better going for a complete set of lifted springs all round?
Another option and by far the cheapest are spring lifters but are these strong enough when used off road?
Sorry more than one question there!
Cheers
paul_humphreys:
I have OME springs fitted and mine sits level. Another way could be to fit a set of spacers under the spring seats. Look on the Mill Services web site for them, Richard can make them any hight up to 4 inches I think.
Paul
Leigh:
Yep seen them when looking at the rock/tree sliders but are they strong enough when off road?
paul_humphreys:
The tree sliders are, I have tested mine a few times :D
Paul
davidlandy:
a pair of D44 spec OME 2" lift springs are good on the front - thats what Im running - makes it nice and high!
Navigation
[0] Message Index
[#] Next page
Go to full version