Chat & Social > The Bar - General Chat
Help please
Pete5844:
Would that be those small rounded off one's :lol: ,if these have to come off I'll have to drill the heads off so need to know for sure before I do it.
Am now very wet and very p****d off with life,4 hours to remove 6 bolts and get nowhere. :cry:
ian_s:
hmmm, those hubs are different from mine, and i dont know how to get them apart.
looking at that picture, are there 6 very small screws around the cap of the hub? jsut outside the disk that turns to engage the/disengage the hub.
one other thing, there will be one or more springs inside the freewheel hub, so be careful when you take it apart.
hobbit:
Try a pointed screwdriver tapped into the screws, put as much twist on the screw as you can and then tap it again with the hammer, they might give way, normally only the first resistance and then they should come out easily, then look for some replacement screws
Kev
Pete5844:
Cheers people I'll try again after work tomorrow.
Pete5844:
Sorted I think :lol:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version