Chat & Social > The Bar - General Chat

LT77 gear box

(1/5) > >>

Bob696:
Sorry mods but this involves range rovers, discos and 110s  :shock: and its also a little desperate so I put it in here.

Story
Bought an LT77 of Chris 9119 (an LT 77 with the serial/model number HRC2071 SG2) marked up as for a 200Tdi
Took our LT77 out of the 110 at the maintanance weekend today and be blowed if the spline to the clutch/engine isnt different (I thought an LT77 was an LT77) Serial/model number of the one we took out is HRC 1543 DD1. The engine fitted in the 110 is a 3.5 V8 from a RR. We have been told in the past that the gearbox is from a disco.

The question is will a flywheel from a defender/disco fit into the clutch of the V8 so that the spline will fit the damn thing? or has anybody got any other suggestions?

If it will fit does anybody in the west midlands have one that I could get tomorrow (sunday)?

BTW many thanks to Chris9119 and Mark (MarkandJacks) for all the effort they put in today, I owe you one (OK many)

Xtremeteam:
how many gears has the V8 got?

i rekon that the V8 box is a coarse spline & the the LT77 should be a fine spline,

also the box out the 110 if a 5 speeder could/should/maybe be a santana which is an LT85

Richie_EB4:
From memory.......the v8's have a different bellhousing and input shaft to the 200tdi.
They can be changed tho  :lol:

chris9119:
Both boxes are LT77, but suffixed as indicated above.

The one i sold Bob has a thicker engine/clutch spline than the original.

Chris

chris9119:
Bob

See here: http://www.ashcroft-transmissions.co.uk/category_5.html

Chris

Navigation

[0] Message Index

[#] Next page