Vehicle & Technical > Defender

Heater air intake

<< < (2/2)

Xtremeteam:
any o the ones ive done has been remove the outer grill,remove the 4 underneath the grill from the wing into the plastic,remove the 2 stays & washer bottle & squeeze it out the gap,canny think o why a TD5 should be any different

SteveG:
The grill is only secured on by top screws, so that's all you need to undo.

Cheers

Steve

smo:

--- Quote from: "SteveG" ---The grill is only secured on by top screws, so that's all you need to undo.

Cheers

Steve
--- End quote ---


Grill already off, but intake firmly held...i'll look for more screws underneath the wing edge like mike suggested :)

Navigation

[0] Message Index

[*] Previous page