Vehicle & Technical > Mitsubishi

size wheels should i have?

(1/3) > >>

Super paj boy:
Got a 2.8 lwb running on 15s but dont think that they are big enough.wot are the cheap options to give me more lift.still think that the wheels are to small

markyd:
looks like 265/75r15 fitted.

you limiting factor is your lift, need a suspension lift, a lift you are talking around £215 for pro comp uprated springs, and new shockers.

And a nice set of M/Ts 32 10.5 r15s :lol:

or you can go to 16" rims 8)

Mutz:
Really depends on how hard you push it?
Just laning or mild off road, i think you would get away with fitting taller tyres to your existing wheels, Have you turned the front torsion bars up which will give you another 30m/m clearance.
Both of mine have had the front bars done and cope with 31x11.50x15 M/T's.
One of them on quite extreme ground for a fairly standard Paj and no catching anywhere, will replace these with 33's M/T's when they need replacing, but i am already buying the parts to raise the rear end including es9000+2 the front will probably require a small amount of cutting though so they dont catch off road.

Super paj boy:
no havent turn the torsion bars yet as still not 100% how to and was unsure about it. were would be the best place to get tyres or rasied kit

Offroader:
I'm currently running on 265/75/15 a/t's but would like to get more aggressive m/t's pref. bfg's, what equivalent imperial size could I get away with without any mods :?:


Shogun SWB 2.5

Navigation

[0] Message Index

[#] Next page