Vehicle & Technical > Discovery

hub

(1/2) > >>

POTASH:
i have took everything off, half shaft etc but cant get hub off its moviig in an out a bit, but cant seem to pull it off am i missing something

BrumLee:
If you've taken the hub nuts and brake caliper off the hub should come away. Sometimes they can stick a bit so a little more banging it backwards and forwards should help, if not the bearing may have welded on the axle  :cry:

Damonski:
Wasnt' there a post on here about some kind of halfshaft slide pulling hammer device someone had made?

Range Rover Blues:
sounds a bit like the inner race is stuck, give a damn hard yank on the hub as you will have to pull the oil seak out of the hub, leaving the inner race of the inner bearing still on the stub axle.  Smash it off with a hammer and cold chisel (for crying out loud wear gogles).

davidlandy:
...or angle grind it off

wow what a tool - is there anything they can't do?

Navigation

[0] Message Index

[#] Next page