Vehicle & Technical > Defender

suspension bushes

<< < (2/3) > >>

bullfrog:
I would avoid deflex .
 :evil:
I have just fitted a set of blue polys to a customers car and they were well made and a doddle to fit. :)
I fitted bearmach ploys to my RRC and 90 and they do need a press but fit well and seem ok so far :?  :)

Range Rover Blues:
Never had a problem with Deflex and the Panhard rod is so cheap to rebush I do it once in a while anyway, not that I see any damage on the bush.  I hear about these bushes damaging the housing but if they are fitted properly I just don't get it, the bush spins on the stanless insert and pretty much welds itself to the housing.  Of coourse a metaliastic bush is secured by the metal sleeve and therefore stronger, but not a DIY replacement.

mmgemini:
I don't have a press or a large vice but I still manage to fit Land Rover bushes easily.

clbarclay:

--- Quote from: "mmgemini" ---I don't have a press or a large vice but I still manage to fit Land Rover bushes easily.
--- End quote ---


Would you care to elaborate how? they should be a very tight fit by design.

graham2306:
Cant speak for mmgemini, but I fit mine easily by taking them to my local independent Land Rover Specialist who presses them in with his press :D  :D  :D  :D  :D

Navigation

[0] Message Index

[#] Next page

[*] Previous page