Vehicle & Technical > Discovery

Clutch gone, need help!!!

<< < (2/2)

tjsj:
Just like to say thanks for all the replies and am kind of looking forward to doing it now. Do you think it could be done in a day?? I can probably get hold of an engine hoist so shouldn't be too bad and also got a couple of people who can help too. Talked to phoenix chris at malvern today and he told me step by step what to do so should be up and running again in a few weeks.

Sharpshooter:
Mine took most of the day. With lots of thinking/Tea Breaks. As has been said up top. Make sure you buy the new clutch operationg arm, and a couple of silly plastic clips, which retain the Release bearing. They are all just under £20 from a land rover dealer. This is what went on mine in the end. I didnt need to change the clutch plates, but whilst it was out it wasnt worth messing around.  Most useful thing i found when refitting is. Put the diff lock in, and put it in gear. That way, if the splines dont line up, you can rotate the drive flange to turn the input shaft. :D

Oh, and its alot easier to change the g/box and t/box oils whilst its out too.

Navigation

[0] Message Index

[*] Previous page