Vehicle & Technical > Discovery

air filter

(1/1)

paul and sam:
does anyone know how to fit a snorkel to my disco . its a v8 efi with a round air filter housing it has been fitted to the horn at the front of the housing and i need to move it from there as in need of the space for a second battery any idears ??










and they say this is ment to be fun :(biglaugh):

Skibum346:
Check out the pics in my gallery here.

Mine is a V8 cat but it shouldn't take too much more to make it suitable for an efi.

I know some people fit a K&N filter in place of a mushroom top...

Good luck.

Range Rover Blues:
I have exactly the same problem so I made a box that I then welded to the side of that round air filter housing, having ciut a hole in it first, welded a piece of tube to the box and connected the snorkel flexi to that tube, I then blanked the original air intake.  As a bonus i have shortened the length of snorkel flexi, which is good and I have both cold air from the snorkel and 'normal' under bonnet air if I remove the front cover of the air filter.

The only probalm is the atandard air filter housing is made from tinfoil and very difficult to weld.

Navigation

[0] Message Index