Vehicle & Technical > Defender
90 Turbo Exhaust
graham2306:
I have finally managed to get all the bits required to fit a 90 Turbo exhaust to my 90 with a Disco engine. I need to know how the rear end og the exhaust is mounted to the chassis, I've got all the bits but no part diagram showing where the bracket botks to on the chassis.
The truck had a 2.5 NA in it origina;lly and all the exhaust mountings are in a different place. I have put a Disco 200Tdi in it and I've got a 2.5 Turbo exhaust to go on it. If you've got a 90 2.5 Turbo and a digital camera how about doing me a favour and taking some snaps of the exhaust bracketry.
Ta
graham
dew1911:
110 Turbo D if that'd be any help.
Xtremeteam:
--- Quote from: "dew1911" ---110 Turbo D if that'd be any help.
--- End quote ---
no thats different totally
have u gone straight through & done away with the centre box or is it still in place?
smo:
Its a bit of a custom setup there, different engine, different exhaust so your best bet is to bolt it on, and then attach the beackets where they are needed...kinda trial and error but hopefully without the error :)
Xtremeteam:
its easy,thats the exhaust thats on mine just now but i have a straight through pipe instead of a centre box
Navigation
[0] Message Index
[#] Next page
Go to full version